Во время попытки добавления выбранного устройства произошла ошибка successful ok ignored epson

iPhonesia.ru » Статьи и обзоры » Как исправить ошибку Successful-ok-ignored-or-substituted-attributes на macOS

• 10-04-2021, 18:50
• |
• оценили: 3
• |
• просмотров: 12 472
• |
• ошибка в тексте
• |
• ‹ вернуться назад

iPhonesia.ru

Как исправить ошибку Successful-ok-ignored-or-substituted-attributes на macOS

С обновлением на операционную систему macOS Big Sur пользователи могут встретиться с ошибкой Successful-ok-ignored-or-substituted-attributes при попытке добавить принтер. Данная ошибка устраняется довольно легко и быстро. iPhonesia.ru рассказывает как.

В большинстве случаев с такой проблемой сталкиваются пользователи принтеров, сканеров и МФУ от компании Epson. Связано это с тем, что при обновлении на macOS Big Sur операционная система удаляет несовместимые драйверы с компьютера Mac. Решением данной проблемы является повторная загрузка и установка нового драйвера для вашего принтера/сканера/МФУ.

Как исправить ошибку Successful-ok-ignored-or-substituted-attributes с Epson?

2. Пролистните вниз до Find your model.

3. В левом поле введите модель вашего принтера. Например, L200.

4. В правом поле выберите Russian и нажмите Search.

5. В вываливающемся списке справа выберите macOS 11 (Big Sur). Страница обновится.

6. Нажмите на «Драйверы» под Product Setup и выберите Driver.

7. Скачайте и установите dmg-файл.

8. Готово. Перезагружать Mac не надо. Можно приступать к печати.

Источник

Question: Q: Printer Driver

Trying to update the printer driver for an Epson Stylus Photo R360 printer to work with OS Big Sur. The Epson compatibility assistant confirms there is a driver available. But on trying to install the printer I get an error message «An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes» then abandons the installation. Anybody any idea how to get around this please?

Posted on Nov 13, 2020 12:22 PM

I have found the following driver :

Posted on Nov 17, 2020 11:34 PM

Helpful answers

Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.

Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.

Nov 15, 2020 7:07 AM

There’s more to the conversation

Loading page content

Page content loaded

I have the same problem with the Epson L805 printer. After upgrading to the Big Sur version, the printer returns the error-successful-ok-ignored-or-substitutes-attributes. Can you help me solve the problem? I can’t work((((

Nov 15, 2020 5:33 AM

Nov 15, 2020 5:39 AM

Have you tried deleting the printer and then adding it back? Have you checked Epson website for your model for compatibility?

Nov 15, 2020 6:01 AM

Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.

Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.

Nov 15, 2020 7:07 AM

Thanks for your reply. but why did he still print on Catalina, but no Big sur?. And if they go back to the previous version of Mojave the problem will be solved? But the computer will work much worse? I don’t know much about it.. and I can’t afford to buy a new printer yet(((

Источник

Question: Q: Big Sur removed epson printer and now will not add it back

It begins the process of adding it but while ‘setting up EPSON Workforce 610. An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes’

Anyone with any ideas? Don (11-14-20 13:04 PST)

iMac Pro, macOS 11.0

Posted on Nov 14, 2020 1:06 PM

This worked for me. Thanks!

Posted on Nov 15, 2020 9:18 PM

Helpful answers

I had an issue with my Epson Workforce 320 where it was removed from System Preference and when I tried to add it the Epson software on my Mac would not install, with a dialogue box saying it could not complete installation.

I solved my problem by going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33. I ran that installer and went back to add printer. This time it added the print and all works fine now.

MacOS Big Sur must have altered/broke the Epson software on my Mac.

Nov 15, 2020 7:59 PM

Fj2000, Thank you for sharing that. I solved my problem by doing what you did, going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33 (for Mac 11.0.1 no less), ran the installer, then was successful at adding my printer in Printers and Scanners. So, thank you for sharing what you did, it also worked for me! Don (11-16-20 05:45 PST)

Nov 16, 2020 5:46 AM

There’s more to the conversation

Loading page content

Page content loaded

Temporarily using Gutenprint 5.3.3 driver so I can at least print again. Probably won’t be able to use the scanner till I get an updated Epson driver from Apple. Don (11-14-20 15:23 PST)

Nov 14, 2020 3:24 PM

Will that work for the epson nx420 printer

Nov 15, 2020 2:50 PM

It certainly wouldn’t hurt to try. I didn’t know for sure if it would work for my workforce 610 until I tried, and it worked. So give it a whirl and see, or you could wait for Apple to supply a new Epson driver? Good luck either way. Don (11-15-20 15:08 PST).

Nov 15, 2020 3:08 PM

I had an issue with my Epson Workforce 320 where it was removed from System Preference and when I tried to add it the Epson software on my Mac would not install, with a dialogue box saying it could not complete installation.

I solved my problem by going to Epson support and downloading the Mac 10.15.x Printer Driver v10.33. I ran that installer and went back to add printer. This time it added the print and all works fine now.

MacOS Big Sur must have altered/broke the Epson software on my Mac.

Источник

Question: Q: Printer problem mac OS Big Sur

Printing went well on Catalina. Now printing stopped and showed message ‘Filter failed’. Using printer Lexmark C543 and removed and entered the printer once. Same problem. Printer supply is visible in browser. Seems to be OS problem.

MacBook Pro 13″, macOS 10.12

Posted on Nov 14, 2020 3:32 AM

Excellent suggestion! After deleting, adding the same printer and using Generic PostScript Printer printing is again functioning.

Posted on Nov 16, 2020 1:11 PM

Helpful answers

The generally suggested fix for the ‘Filter failed’ problem is to delete the printer and then upload the driver yourself, not let it select from the OS builtin set. However, right now the Lexmark driver site doesn’t allow Big Sur (10.16) as an option for a driver download.

Nov 14, 2020 6:36 AM

Same problem overher with my Lexmark CX310 when i print. Printer receives nothing it even does not even wake up. Tried to install new drivers from Lexmark but this is also resulting in an error so new driver are not installed.

Nov 14, 2020 12:01 PM

After MAC OS Big Sur 11.0.1 installed, computer «unable to locate printer». Help please.

Nov 17, 2020 7:41 AM

My company we run a Canon C5035, we updated all the iMac 2019 and MacBook to OS Big Sur. Now when we print the text comes out as gray squares. This is a monumental problem for our business. Please provide support ASAP

Nov 16, 2020 8:20 AM

This error is showing when trying to add a printer. this never happened in catalina

An error occurred while trying to add the selected device.

Nov 17, 2020 10:48 PM

For Lexmark printers (is what I have. ) just install the same driver for your printer using in the «use» drop menu the Generic PostScript Printer.

Nov 16, 2020 12:38 PM

After the update, my Lexmark MS415dn stopped working, «Filter» Failed. I went to the Lexmark support page, no drivers available for the Big Sur update yet.

Additionally after the update when I purchase postage though PayPal, the label appears blank. If I close the page and select «reprint label, it appears and can be printed on my backup printer made by Epson.

I tried to install monochrome Lexmark printer driver and the installation failed. The only driver available was for OS 10.9, nothing yet for 11.01.

Still working on both issues.

Nov 17, 2020 2:44 PM

There’s more to the conversation

Loading page content

Page content loaded

Having same problem with Lexmark B2238 Mono Laser. Worked perfectly before upgrade to 11.0.1. Updated firmware, reset printing system, restarted iMac and printer. Still get » Filter Failed» message.

Nov 14, 2020 4:36 AM

The generally suggested fix for the ‘Filter failed’ problem is to delete the printer and then upload the driver yourself, not let it select from the OS builtin set. However, right now the Lexmark driver site doesn’t allow Big Sur (10.16) as an option for a driver download.

Nov 14, 2020 6:36 AM

Same problem overher with my Lexmark CX310 when i print. Printer receives nothing it even does not even wake up. Tried to install new drivers from Lexmark but this is also resulting in an error so new driver are not installed.

Nov 14, 2020 12:01 PM

In addtion on my earlier message. My Lexmark CX310 als support airprint so i turned on my WIFI on the Mac and used the airprint protocol and it worked. Amazingly even when i turned off the WIFI on the Mac but still used the airprint protocol it worked.

Nov 15, 2020 1:18 AM

My company we run a Canon C5035, we updated all the iMac 2019 and MacBook to OS Big Sur. Now when we print the text comes out as gray squares. This is a monumental problem for our business. Please provide support ASAP

Nov 16, 2020 8:20 AM

Here’s a fix that worked immediately for me».

Nov 16, 2020 8:26 AM

Here’s a fix that worked immediately for me

Nov 16, 2020 8:27 AM

Just installed Big Sur on my Mac mini 2018.

Tried to print to a Canon Image Class MF 4150 and then to a Brother HL-L2360D printers to no avail.

Had to RESET the Mac printing system to solve a problem.

If you can’t print to your printer and you’ve tried all other solutions, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.

Important: First, try other troubleshooting techniques in Solve printing problems on Mac.

«iMore re how to reset printing system Mac» which includes screen shots

Источник

IPP 1.1 | Код состояния successful-ok-ignored-or-substituted-attributes

Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 информирует о том, что Запрос выполнен успешно, но некоторые предоставленные атрибуты (1) были проигнорированы или (2) неподдерживаемые значения были заменены поддерживаемыми значениями или были проигнорированы, чтобы выполнить операцию, не отклоняя ее. (раздел B.1.2.2 из RFC 8011)

Неподдерживаемые атрибуты, синтаксисы атрибутов или значения ДОЛЖНЫ быть возвращены в группе «Unsupported attributes» (Неподдерживаемые атрибуты) ответа для всех операций. Из этого правила есть исключение для операций запроса Get-Printer-Attributes, Get-Jobs и Get-Job-Attributes только для атрибута операции «requested-attributes» (требуемые-атрибуты). Когда предоставленные значения атрибута операции «requested-attributes» (запрашиваемые атрибуты) запрашивают атрибуты, которые не поддерживаются, объект IPP ДОЛЖЕН вернуть атрибут операции «requested-attributes» (запрашиваемые атрибуты) в группе ответа «Unsupported Attributes» (неподдерживаемые атрибуты) (только с неподдерживаемыми значениями). (Смотри раздел 4.1.7 и раздел 4.2.1.2 из RFC 8011)

Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 относится к классу ответа операции Successful. (раздел B.1.2 из RFC 8011). Другие «Успешные» коды состояния перечислены в таблице.

Источник

hplip не работает с новой установкой Ubuntu 20.04

Я только что выполнил чистую установку Ubuntu 20.04.1 на Lenovo Yoga 730. У меня есть беспроводной HP Photosmart C4780, который я успешно настроил на другом компьютере Ubuntu 20.04 и Ubuntu 18.04, просто используя

Когда я впервые вошел в новую установку, я использовал

который показал мне, что были установлены hplip и hplip-data. Я побежал

а потом попробовал

что не удается с ошибкой

Чтобы проверить, что не так, я побежал

Первое, что кажется странным, это то, что сообщается, что hplip-gui в Ubuntu 20.04 скомпилирован против qt5. Также многие из этих пакетов, о которых было сообщено об отсутствии / несовместимости, уже установлены (через apt).

Перед моей новой установкой я попробовал apt purge избавиться от всего hplip и переустановить их, но безуспешно. Я пробовал это несколько раз и в конце концов каким-то образом сломал мою систему, что привело к новой установке.

Я не уверен, что делать дальше, чтобы hplip заработал.

3 ответа

На сайте запуска hplip я нашел решение, которое сработало для меня. Это пост №7 в этой теме. Проблема, которую я описываю в вопросе, вызвана Ubuntu 20.04 с использованием python3 с ограниченной поддержкой python2. Если /usr/bin/python ссылается на версию python 2, то при запуске hplip-3.20.**. Run будут возникать проблемы, о которых сообщалось, при попытке и неуспешной установке необходимых компонентов python.

Чтобы диагностировать эту проблему, запустите

если вы получите версию с первой цифрой 2, то исправление будет следующим

Как только я это сделал, то запустил

Вам необходимо установить python3 и все инструменты.

Затем, когда вы бежите hplip ответить «нет» на неудачную установку старого питона.

что кажется необходимым, хотя я не знаю почему. Удалите принтер, затем переустановите, и он должен работать.

Откройте терминал и удалите ранее установленную версию:

Перейдите в папку, где был загружен установщик.

Для установки выполните эту команду:

Выберите режим установки Автоматически, введите

Убедитесь, что установщик обнаружил правильный дистрибутив Linux.

Введите пароль пользователя root / суперпользователя.

Теперь установщик определит, какие зависимости вашей системе потребуется установить перед установкой HPLIP.

Если в вашей системе отсутствуют какие-либо зависимости, они будут загружены и установлены.

./configure подготавливает HPLIP к установке, а также проверяется, что ваша система имеет все необходимые зависимости для HPLIP.

Затем выполняется make. Сделайте компиляцию («сборку») HPLIP для вашей системы.

Используйте «hp-setup» для настройки вашего принтера.

Затем инструмент настройки отобразит обнаруженные принтеры.

Выберите файл PPD, который будет использоваться для вашего принтера, обычно вы хотите выбрать рекомендуемый файл PPD.

Щелкните «AddPrinter», чтобы завершить процесс настройки принтера.

Источник

iPhonesia.ru

С обновлением на операционную систему macOS Big Sur пользователи могут встретиться с ошибкой Successful-ok-ignored-or-substituted-attributes при попытке добавить принтер. Данная ошибка устраняется довольно легко и быстро. iPhonesia.ru рассказывает как.

В большинстве случаев с такой проблемой сталкиваются пользователи принтеров, сканеров и МФУ от компании Epson. Связано это с тем, что при обновлении на macOS Big Sur операционная система удаляет несовместимые драйверы с компьютера Mac. Решением данной проблемы является повторная загрузка и установка нового драйвера для вашего принтера/сканера/МФУ.

Как исправить ошибку Successful-ok-ignored-or-substituted-attributes с Epson?

2. Пролистните вниз до Find your model.

3. В левом поле введите модель вашего принтера. Например, L200.

4. В правом поле выберите Russian и нажмите Search.

5. В вываливающемся списке справа выберите macOS 11 (Big Sur). Страница обновится.

6. Нажмите на «Драйверы» под Product Setup и выберите Driver.

7. Скачайте и установите dmg-файл.

8. Готово. Перезагружать Mac не надо. Можно приступать к печати.

Источник

Question: Q: Printer Driver

Trying to update the printer driver for an Epson Stylus Photo R360 printer to work with OS Big Sur. The Epson compatibility assistant confirms there is a driver available. But on trying to install the printer I get an error message «An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes» then abandons the installation. Anybody any idea how to get around this please?

Posted on Nov 13, 2020 12:22 PM

I have found the following driver :

Posted on Nov 17, 2020 11:34 PM

Helpful answers

Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.

Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.

Nov 15, 2020 7:07 AM

There’s more to the conversation

Loading page content

Page content loaded

I have the same problem with the Epson L805 printer. After upgrading to the Big Sur version, the printer returns the error-successful-ok-ignored-or-substitutes-attributes. Can you help me solve the problem? I can’t work((((

Nov 15, 2020 5:33 AM

Nov 15, 2020 5:39 AM

Have you tried deleting the printer and then adding it back? Have you checked Epson website for your model for compatibility?

Nov 15, 2020 6:01 AM

Epson provided a software updater for this printer from June 04, 2019 and claim it is for Catalina. Since Catalina was not introduced until Apple’s WWDC later in that month, this is likely a 32-bit printer solution that is not compatible with Catalina, and certainly not for Big Sur. This is at least a 15 year old device that was retired by Epson long ago, and is not supported by Apple’s AirPrint either.

Time to shop for a new printer that specifically advertises it supports Apple’s AirPrint, so you are not dependent on Epson driver support.

Nov 15, 2020 7:07 AM

Thanks for your reply. but why did he still print on Catalina, but no Big sur?. And if they go back to the previous version of Mojave the problem will be solved? But the computer will work much worse? I don’t know much about it.. and I can’t afford to buy a new printer yet(((

Источник

IPP 1.1 | Код состояния successful-ok-ignored-or-substituted-attributes

Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 информирует о том, что Запрос выполнен успешно, но некоторые предоставленные атрибуты (1) были проигнорированы или (2) неподдерживаемые значения были заменены поддерживаемыми значениями или были проигнорированы, чтобы выполнить операцию, не отклоняя ее. (раздел B.1.2.2 из RFC 8011)

Неподдерживаемые атрибуты, синтаксисы атрибутов или значения ДОЛЖНЫ быть возвращены в группе «Unsupported attributes» (Неподдерживаемые атрибуты) ответа для всех операций. Из этого правила есть исключение для операций запроса Get-Printer-Attributes, Get-Jobs и Get-Job-Attributes только для атрибута операции «requested-attributes» (требуемые-атрибуты). Когда предоставленные значения атрибута операции «requested-attributes» (запрашиваемые атрибуты) запрашивают атрибуты, которые не поддерживаются, объект IPP ДОЛЖЕН вернуть атрибут операции «requested-attributes» (запрашиваемые атрибуты) в группе ответа «Unsupported Attributes» (неподдерживаемые атрибуты) (только с неподдерживаемыми значениями). (Смотри раздел 4.1.7 и раздел 4.2.1.2 из RFC 8011)

Код состояния «successful-ok-ignored-or-substituted-attributes» в IPP 1.1 относится к классу ответа операции Successful. (раздел B.1.2 из RFC 8011). Другие «Успешные» коды состояния перечислены в таблице.

Источник

Arch Linux

You are not logged in.

#1 2019-09-21 17:18:16

A few months ago I got an HP Deskjet 2630 to replace my old printer and seamlessly installed it without any issues using the HP Device Manager interface. I don’t need to print things frequently, so on Friday I tried to print something and realised my printer wasn’t working anymore.

Initially, I was getting a «failed filter» error in the printing queue when trying to print a document. After some online searching and trying some suggested fixes, I couldn’t really get anywhere and decided to just remove the printer and install it again. However, this came with its own set of problems. This is the output of hp-setup, which produces the same «error: Printer queue setup failed. Error: successful-ok-ignored-or-substituted-attributes» line whether I ran it as root, as a user or through the GUI:

I ran hp-doctor to figure out what’s going on:

Which seems to point at some Python dependencies problem. After more online searching I installed some extra Python packages, but the problem persisted. I read some people suggesting that what looked like similar problems could be solved by installing python-pyqt4 from the AUR, but yay failed to build this when I gave it a shot, so that’s where I stopped, lest I spent the rest of my weekend going down a rabbit hole of nested errors with no guarantee of success.

I downloaded hplip directly form HP’s website and ran that package hoping the results would be different:

But as you can see, it’s still pointing to Python dependency errors. I don’t know if by solving this I can get past the initial problem, but would appreciate some guidance, especially given that I already have the following installed:

My problem may be related to this other thread, but the symptoms are slightly different: https://bbs.archlinux.org/viewtopic.php?id=249239

I shamelessly went to a windows partition that I hadn’t used in 8 months to print the stuff I needed, so it’s not urgent but as I said above, any help’s appreciated!

Last edited by faetter (2019-12-18 00:42:21)

None are more enslaved than those who falsely believe they are free.

Источник

Apple Footer

I recently upgraded from Mojave to Big Sur (11.4). The connection to my network printer (Epson Artisan 810) was not functioning, so I removed it and attempted to reinstall the driver. It fails to so, stating An error occurred while trying to add the selected device. successful-ok-ignored-or-substituted-attributes

I have rebooted and reset the print system, all to no avail. Console does provide some clues when «printer» is searched:

default 09:48:01.456005-0400    runningboardd   Acquiring assertion targeting [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] from originator [daemon<com.apple.coreservices.launchservicesd>:125] with description <RBSAssertionDescriptor| "frontmost:1027" ID:200-125-18714 target:1027 attributes:[
    <RBSDomainAttribute| domain:"com.apple.launchservicesd" name:"RoleUserInteractiveFocal" sourceEnvironment:"(null)">
    ]>
default 09:48:01.456317-0400    runningboardd   Assertion 200-125-18714 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027]) will be created as active
default 09:48:01.479778-0400    runningboardd   Calculated state for app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>: running-active (role: UserInteractiveFocal)
default 09:48:01.482394-0400    runningboardd   Finished acquiring assertion 200-125-18714 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027])
default 09:48:01.483366-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring jetsam update because this process is not memory-managed
default 09:48:01.483388-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring suspend because this process is not lifecycle managed
default 09:48:01.483601-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Set darwin role to: UserInteractiveFocal
default 09:48:01.483899-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring GPU update because this process is not GPU managed
default 09:48:01.484344-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Skipping AppNap state - not lifecycle managed
default 09:48:01.484477-0400    runningboardd   Acquiring assertion targeting [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] from originator [daemon<com.apple.coreservices.launchservicesd>:125] with description <RBSAssertionDescriptor| "notification:1027" ID:200-125-18715 target:1027 attributes:[
    <RBSDomainAttribute| domain:"com.apple.launchservicesd" name:"LSNotification" sourceEnvironment:"(null)">
    ]>
default 09:48:01.484553-0400    runningboardd   Assertion 200-125-18715 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027]) will be created as active
default 09:48:01.485064-0400    runningboardd   Calculated state for app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>: running-active (role: UserInteractiveFocal)
default 09:48:01.485209-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring jetsam update because this process is not memory-managed
default 09:48:01.485251-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring suspend because this process is not lifecycle managed
default 09:48:01.485287-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring GPU update because this process is not GPU managed
default 09:48:01.485428-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Skipping AppNap state - not lifecycle managed
default 09:48:01.485663-0400    runningboardd   Finished acquiring assertion 200-125-18715 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027])
default 09:48:04.800023-0400    authd   Succeeded authorizing right 'system.print.admin' by client '/usr/sbin/cupsd' [869] for authorization created by '/System/Library/CoreServices/AddPrinter.app' [1027] (2,0) (engine 1474)
default 09:48:07.479723-0400    runningboardd   Assertion did invalidate due to timeout: 200-125-18715 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027])
default 09:48:07.686923-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring jetsam update because this process is not memory-managed
default 09:48:07.686939-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring suspend because this process is not lifecycle managed
default 09:48:07.686954-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Ignoring GPU update because this process is not GPU managed
default 09:48:07.686999-0400    runningboardd   [app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027] Skipping AppNap state - not lifecycle managed
default 09:48:07.687164-0400    runningboardd   Calculated state for app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>: running-active (role: UserInteractiveFocal)
default 09:48:23.980779-0400    authd   Succeeded authorizing right 'system.print.admin' by client '/System/Library/CoreServices/AddPrinter.app' [1027] for authorization created by '/System/Library/CoreServices/AddPrinter.app' [1027] (13,0) (engine 1476)
default 09:48:24.091142-0400    AddPrinter  #print printToolAgent:error - 1, command - kCPLCreateQueue (32)
default 09:48:24.096937-0400    AddPrinter  #print Unable to add printer: "<private>"
default 09:48:27.282442-0400    authd   Succeeded authorizing right 'system.print.admin' by client '/usr/sbin/cupsd' [869] for authorization created by '/System/Library/CoreServices/AddPrinter.app' [1027] (2,0) (engine 1477)
default 09:48:28.299091-0400    runningboardd   Invalidating assertion 200-125-18714 (target:[app<application.com.apple.print.add.1152921500312125551.1152921500312125556(502)>:1027]) from originator [daemon<com.apple.coreservices.launchservicesd>:125]

Searching on «epson» yielded this:

error   09:48:04.840050-0400    kernel  Sandbox: epsonfirewire(18123) deny(1) sysctl-write kern.system_version_compat
error   09:48:27.322184-0400    kernel  Sandbox: epsonfirewire(18138) deny(1) sysctl-write kern.system_version_compat