Перейти к контенту
Does your Ricoh printer show an error of code SC 544-00? Ricoh printers have been the best quality printers in the computer industry but faults can arise in such a fine range of printers as well. The error code SC 544-00 is known to be an error that is related to the fuser especially when it is overheated. This error is taken from the 5 series of errors and leads to bad paper feed. You may be wondering about an effective answer to this question How to fix Ricoh printer error SC 544-00 so that you would be able to use your printer again with the same ease and flexibility. Here we answer it for you.
A Complete Guide to Fix Error SC 544-00
There are only two steps involved in rectifying this issue for once and getting your printer back into its functional mode. Given below are these steps that will surely help you in mitigating the Ricoh Printer Error SC 544-00:
Step 1: In this method, you shall perform useful procedures that will help in resetting the fuser.
As if the issue has occurred due to some problem in power, this will remove the error immediately. Now, for resetting the fuser, it is crucial to locate the home and screen buttons and press them simultaneously for about 6 seconds so that the printer opens into the service mode and you can perform the required operations. After that, choose the User tools and from the given printer models, select the printer model that you have. Later, choose the fuser reset error and let your printer reboot and start again.
Step 2: Now that you have formatted the fuser settings back to the factory reset mode.
It is the right time that you move towards the step of resetting the printer back to its factory reset mode. This will help in refurnishing the Ricoh printer as well as will save all the previously made amendments. For resetting the printer, you must start by switching the printer on and then, waiting for around 4 minutes so that it becomes fully operational. After that, you may take out the power cord from printer’s back and remove it from the switchboard. Further, wait for about 2 minutes, and then again put the power cable back on both the printer and the switchboard to operate the printer. After that, you may turn on the printer and check that the error might have disappeared and you can now print all your sheets hassle-free.
This procedure is the most effective method to bring your Ricoh printer back into the operational mode. Thus, you must try out the above steps if you face Ricoh Printer error SC 544-00. However, if the printer does not still perform the printing function, it is high time that you must consult a good printer technician who can not only aid you in fixing your Ricoh printer but also provide relevant guidelines for any printer issues that may arise in future.
Первое новое сообщение • Сообщений: 3
• Страница 1 из 1
Ricoh sp 203sfnw ошибка 544
dzo1970 » 16:46 — 08.07.17
Ошибку 544 не могу скинуть т.к в сервисное меню вход заказан со всеми или почти всеми подсказками и рекомендациями про вход в меню.Если у кого то хоть раз получилось опишите по пунктам как вы это сделали в выше указанной модели .
- dzo1970
- новичок
- Сообщения: 2
- Зарегистрирован: 16:34 — 08.07.17
- Баллы репутации: 0
- Mishel01
- эксперт
- Сообщения: 8413
- Зарегистрирован: 01:10 — 10.01.11
- Баллы репутации: 1
- dzo1970
- новичок
- Сообщения: 2
- Зарегистрирован: 16:34 — 08.07.17
- Баллы репутации: 0
Сообщений: 3
• Страница 1 из 1
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
Вернуться в RICOH
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 1
Все время на других сайтах ищу коды ошибок, решил не искать, а просто опубликовать коды ошибок у себя на сайте, сразу скажу честно, содрал на другом сайте 🙂
|
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
 Запчасти для ТОне требуются |
||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||
| Основные коды ошибок |
||||||||||||||||||||||||||||||||
|
В заметке использованы материалы с riconik.info
SC544 — ошибка термистора. Чтобы до него добраться открываем переднюю крышку, откручиваем 1 болт.
Отсоединяем красный разъем.
Открываем правую крышку, отсоединяем правый нижний разъем, который идет на печку. Откручиваем 2 болта и достаем печку.
Вот мы и добрались до термистора, который крепится одним болтом.
Меняем его, ставим печку на место.
Осталось сбросить ошибку. Для этого входим в сервисный режим: нажимаем «Clear Modes» — 107 — «Clear/Stop» (необходимо удерживать 3-5 сек). Потом нажимаем: 1 — 5 — # — 810 — # — 1, нажать и удерживать «Original» (текст или фото) и неотпуская ее нажать «Start». Аппарат готов к работе.
Данная утилита позволит без труда сбросить такие ошибки как:
SC541
SC542
SC543
SC544
SC545
SC559
Как использовать утилиту для сброса ошибок:
1. Подключить принтер Ricoh SP150 с помощью USB кабеля к ПК
3. Отключить все остальные USB устройства
2. Запустить CE Tools, аппарат включится
3. Выбрать меню: Output Check.
4. Выбрать позицию: FusingSCReset
5. Выбрать ON.
6. Закройте программу.
Скачать бесплатно.
4. Replacement and Adjustment
• To cancel SC544-02/554-02, it is necessary to replace the fusing unit or install an intact new unit
detection fuse. If you will cancel these SCs by installing a new unit detection fuse, follow the
instruction below.
• If you are replacing the heating sleeve unit for PM or any reason other than canceling these SCs,
you can discard the fuse that is packed with the new heating sleeve unit.
1.
There is a new unit detection fuse packed with the new heating sleeve unit.
2.
Connect the new unit detection fuse to the connector.
350
Ricoh printers have long been renowned for their exceptional quality within the computer industry. However, even with such superior printers, occasional faults may arise.
One such error code is SC 544-00, which typically indicates an issue with the fuser, particularly when it becomes overheated. This error, classified as part of the 5 series of errors, often leads to problems with paper feeding.
If you’re seeking an effective solution for resolving the Ricoh printer error SC 544-00 and restoring your printer’s functionality and convenience, you’ve come to the right place. In this article, we provide a complete guide to fix this error.
Step-by-Step Guide to Fix Error SC 544-00
Rectifying this issue and bringing your printer back to its operational state involves just two simple steps. Follow the instructions below, and you’ll likely be able to resolve the Ricoh Printer Error SC 544-00:
Step 1: Resetting the fuser
If the error is due to a power-related problem, this step will help eliminate the error promptly. To reset the fuser, locate the home and screen buttons on your printer and press them simultaneously for approximately 6 seconds.
This action will open the printer into service mode, allowing you to perform the necessary operations. Next, select User tools and choose your specific printer model from the options provided. Then, select the fuser reset error and allow your printer to reboot and restart.
Step 2: Restoring factory settings
Now that you’ve reset the fuser settings, it’s time to reset the printer back to its factory defaults.
This process will restore the Ricoh printer to its original state while preserving any previous customizations you made. Begin by turning the printer on and waiting for about 4 minutes for it to fully initialize.
Then, disconnect the power cord from the printer and unplug it from the switchboard. Wait for approximately 2 minutes before reconnecting the power cable to both the printer and the switchboard.
Finally, power on the printer and check if the error has disappeared, allowing you to print your documents effortlessly.
By following the above steps, you can effectively resolve the Ricoh printer error SC 544-00 and restore your printer to its operational state.
However, if the issue persists and your printer still fails to print, it is advisable to seek the assistance of a qualified printer technician.
A professional technician can not only help you fix your Ricoh printer but also provide valuable guidance for any future printer-related issues that may arise.