Hi N1745Q,
I am not with Laminar Research; just a flight simmer.
I have looked at many a «Log.txt» file in this forum and never seen one of such length as yours. Unfortunately I cant interpret some of the messages. There are others who can.
However what I do understand is that with all of your add-ons there may be conflict between packages causing your problem.
My suggestion would be to delete all of these addon packages (preferences?) and start afresh with what you want to do and get it working and then slowly and methodically add one package at a time to determine the offender.
As a sideline issue, there are references to XP10 in the log.txt file. Have you mixed XP10 and XP11 into one package (directory) If so XP10 will not work in XP11. From very early previous references in this forum this has been made clear.
As a further sideline issue, XP 11.30 has not been officially released. It is still in the testing phase. There are earlier postings not so far back where other flight simmers have been experiencing problems with XP11.30 while trying to fly into or out of airports designated «K…..» Apparently it is a known bug. Fixed?
Good luck
Glenn
Recommended Posts
Now when I start XP11 I get a message saying
Be advised
Error reading joystick configuration (.joy) file
Resources /joystick configs/Xbox 360 wired controller windows.joy
and then a list over unknown buttons
But I have no such xbox wired controller. I have not made any changes to any config files regarding joysticks
Share this post
Link to post
Share on other sites
I make sure you didn’t put anything there I should be in the resource folder. I am not sure about the steam version but if worse comes to worse, where you got the steam version, I would re download over that and it should straighten that out.
Share this post
Link to post
Share on other sites
11 minutes ago, BobFS88 said:
I make sure you didn’t put anything there I should be in the resource folder. I am not sure about the steam version but if worse comes to worse, where you got the steam version, I would re download over that and it should straighten that out.
Ni I did not put anything there, but I see a lot of files was put there during installation i.e all supported devices among which are this xbox controller. In XP11 under settings joystick only the devices I do have is listed
Share this post
Link to post
Share on other sites
53 minutes ago, jfri said:
but I see a lot of files was put there during installation i.e all supported devices among which are this xbox controller.
I didn’t realize they did that but knowing LR they try to support every device known to man without any fanfare and never given credit for that. I learn something new about this sim everyday.
-
2
Share this post
Link to post
Share on other sites
Create an account or sign in to comment
You need to be a member in order to leave a comment
Sign in
Already have an account? Sign in here.
Sign In Now
X-Plane 11 is available on the Steam platform. The X-Plane product from Steam is identical to other home versions of X-Plane. As a result of this, most support advise is identical for the Steam version of X-Plane. We have outline a few exceptions to this below.
X-Plane Will Not Start
If you are using X-Plane on Steam, and you’re experiencing crashes or problems updating – you need to verify the Steam files of X-Plane. Here are some steps for this!
- Open the Steam client application.
- Move to the Library tab on Steam.
- Right click on X-Plane 11.
- Choose Properties.
- Move to the «Local Files».
- Click on «Verify Integrity of Game Files».
X-Plane Requests a Product Key
When you purchase X-Plane 11 on the Steam Platform, you do not receive a Product Key for the app. Your purchase/license information is stored and administered by Steam. If the X-Plane app ever asks you for a Product Key, following the file verification steps above will resolve this.
Did this answer your question?
Thanks for the feedback
There was a problem submitting your feedback. Please try again later.
Still need help?
Contact Us
Contact Us
Last updated on January 4, 2021
From the topic I posted above.
1. If when you start X Plane 11, you see this message ,
or the same white text on a blue background
then it may be that the file conversion is not complete.
This can be resolved by
a. running «Verify Files» which will restart the conversion process, OR
b. downloading Convert.cmd, placing it into
- X-Plane 11Custom SceneryOrbx_C_GB_South_TrueEarth_Orthostextures (for TE GB South)
- X-Plane 11Custom SceneryOrbx_C_GB_North_TrueEarth_Orthostextures (for TE GB North)
- X-Plane 11Custom SceneryOrbx_C_GB_Central_TrueEarth_Orthostextures (for TE GB Central)
and then running it as an Administrator.
For reference:
- the fully installed TE GB South textures folder should contain 12098 files and there should be no .jpg files
- the fully installed TE GB Central textures folder should contain 7333 files and there should be no .jpg files
- the fully installed TE GB North textures folder should contain 13586 files and there should be no .jpg files
Latest version: v2.1 (2020)
-
hkterry
- 5-12 posts
- Posts: 7
- Joined: Sunday 11 Aug 2013, 15:45
- Location: Hong Kong
After installing the UUEE and Moscow City in the X-plane 11 using the Installer and selected the X-plane 11. I started the X-plane 11 but an ERROR MESSAGE CAME OUT «Be Advised Message : Loading navigational data failedReading file C:Users/Terry/Desktop/X-Plane11/Recourses/default data/earth_nav.dat. The navaidIAD in25R is missingan entry. Report to your Navdats provider. Please note that X-Plane 11 is not compatibile with navdata filesmade for X-Plane 10. After I press the UNDERSTAND icon the X-Plane 11 quit.
-
DD Stanislaw
- Administrator
- Posts: 6118
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Post
by DD Stanislaw » Monday 30 Jan 2017, 15:48
Try removing that file and launching the sim.
-
hkterry
- 5-12 posts
- Posts: 7
- Joined: Sunday 11 Aug 2013, 15:45
- Location: Hong Kong
Post
by hkterry » Tuesday 31 Jan 2017, 03:54
DD Stanislaw wrote:Try removing that file and launching the sim.
Thanks for quick response.
After removing the file, Error Message came out : Leading navigational data failed; Absolutely no navdata installed, Please note that X-Plane is not compatible with navadata files made for X-Plane 10.
[ Added: Tue Jan 31, 2017 11:54 ]
I refer to my post above. I updated the X-Plane 11 Beta 9 version first then I installed UUEE and Moscow City. After that I ran the X-Plane 11 the error message came out saying the problem mentioned above. Before updated to Beta 9, I have no problem in running New York City and Airports.
Please advise how to repair this.
-
Moter
- 50-99 posts
- Posts: 67
- Joined: Tuesday 25 Nov 2014, 09:41
- Location: Gomel, Belarus
Post
by Moter » Tuesday 31 Jan 2017, 07:32
Run x-plane 11 uptader, and click update. After check x-plane files updater automaticly download missing earth_nav.dat file. After update try to open our scenery again. If trouble presists, then send to me or attach to post your log.txt.
For information — Stanislaw disabled earth_nav.dat edition function in our installer for X-plane-11. That means trouble not may be due to our scenery.
You try edit earth_nav.dat file youself?
-
DD Stanislaw
- Administrator
- Posts: 6118
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Post
by DD Stanislaw » Tuesday 31 Jan 2017, 08:09
Also please check if you really use the latest version of our scenery.
-
hkterry
- 5-12 posts
- Posts: 7
- Joined: Sunday 11 Aug 2013, 15:45
- Location: Hong Kong
Post
by hkterry » Wednesday 01 Feb 2017, 10:32
DD Stanislaw wrote:Vladislaw, you mean the fix above does not work?
Checked and found the Moscow City is Version 1.1 and UUEE is Version 1.6. Both Installers have the selection for X_plane 10 and 11.
[ Added: Tue Jan 31, 2017 23:21 ]
I refer to my previous posts. I have found this error message in my Log.txt of X-Plane :
Found an illegal name for a runway end («H109H109») at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end («H109») at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end («H108H108») at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
Found an illegal name for a runway end («H108») at airport EPBC (in file Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat)
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
We found a duplicate runway H10/H10 vs H10/H10 at airport EPBC (Custom Scenery/DD Warsaw City XP Layer 1/Earth nav data/apt.dat
0:01:14.688 E/SYS: +——————————————————————————-
0:01:14.688 E/SYS: | Loading navigational data failed:
0:01:14.688 E/SYS: | Reading file C:Users/Terry/Desktop/X-Plane 11/Resources/default data/earth_nav.dat. The navaid IAD in 25R is missing an entry. Report to your Navdata provider.
0:01:14.688 E/SYS: |
0:01:14.688 E/SYS: | Please note that X-Plane 11 is not compatible with navdata files made for X-Plane 10.
0:01:14.688 E/SYS: | (navt.cpp:425)
0:01:14.688 E/SYS: +——————————————————————————-
0:01:14.688 D/STM: Transitioning from state state_InitialLoading to state_ShuttingDown
0:01:14.688 D/HID: HID Bridge Shutdown
—— X-Plane has shut down ——
I am a new user of X-Plane , may be above contents can help you to find out the reason. Thanks
[ Added: Wed Feb 01, 2017 18:32 ]
I want to add that after the installation of UUEE and Moscow City when I ran the X-Plane 11 the about error message came out then quit automatically after pressing the UNDERSTAND icon.
After that I tried to install the Warsaw City hoping this would correct the nav.dat but the same error message still came out.
Should I need to uninstall X-Plane 11 and reinstall it again. Please advise.
-
DD Stanislaw
- Administrator
- Posts: 6118
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Post
by DD Stanislaw » Wednesday 01 Feb 2017, 15:30
I see only EPBC-related issues, nothing about UUEE or Moscow.
-
hkterry
- 5-12 posts
- Posts: 7
- Joined: Sunday 11 Aug 2013, 15:45
- Location: Hong Kong
Post
by hkterry » Friday 10 Feb 2017, 03:50
DD Stanislaw wrote:I see only EPBC-related issues, nothing about UUEE or Moscow.
I have disabled the Warsaw City, UUEE and Moscow City in the scenery_packs.ini but still cannot run the X-Plane 11. Please advise what should I do ? Is it necessary to re-install X-Plane 11 ?
Thanks
[ Added: Fri Feb 10, 2017 11:50 ]
My previous post refers. The problem is now solved after I reinstalled/repaired the X-plane by running the X-Plane 11 Installer again. There may be the bugs in the beta version during installation and nothing related to your products.
-
DD Stanislaw
- Administrator
- Posts: 6118
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Post
by DD Stanislaw » Friday 10 Feb 2017, 04:04
Hi.
Please use the newest version of this scenery which has a dedicated XP-11 installer.
-
Vincenzo
- 5-12 posts
- Posts: 9
- Joined: Friday 31 Mar 2017, 18:25
- Name: Tomas
- Location: Plzen
DME indication
Post
by Vincenzo » Friday 31 Mar 2017, 18:34
Good evening!
I have a small problem with VOR/ILS DME indication in Moscow Sheremetyevo. I would like to ask, how should I get it work? I bought your sceneries of EPWA + UUEE for FSX as well and there it works normally. But in X-Plane 10 I don´t see unfortunately any DME indication in DD sceneries — I have for X Plane your EPWA + UUEE + UBBB and at all airports it doesn´t work. For IFR flights it would be really helpfull. Did I overlook something in settings maybe? At other airports (BIKF, EIDW, LEGE etc. it works and I get there VOR / ILS DME indication).
Thank you for your help!
-
DD Stanislaw
- Administrator
- Posts: 6118
- Joined: Monday 15 May 2006, 10:07
- Name: Stanisław
- Location: Warsaw, Poland
Post
by DD Stanislaw » Saturday 01 Apr 2017, 04:25
Hello.
Is it Windows that you are using? Did you use the automatic installer?
-
Vincenzo
- 5-12 posts
- Posts: 9
- Joined: Friday 31 Mar 2017, 18:25
- Name: Tomas
- Location: Plzen
Post
by Vincenzo » Saturday 01 Apr 2017, 06:28
DD Stanislaw wrote:Hello.
Is it Windows that you are using? Did you use the automatic installer?
Hello Stanislaw,
yes, I use Windows 10. And I used automatic installer.
-
cmaesing
- 13-25 posts
- Posts: 14
- Joined: Saturday 01 Apr 2017, 19:48
- Location: Warsaw
UUEE 1.6 together with Moscow City 1.1
Post
by cmaesing » Saturday 01 Apr 2017, 19:58
Am using X-Plane 10.51 (W7 64), and only yesterday installed these two sceneries (UUEE previously purchased, updated from 1.3), using the automatic installer files from simMarket.com (where the sceneries were also purchased).
Starting X-Plane is impossible now (possibly due to the Warsaw City scenery — I’ll post about that error in the other forum), but I do also get error messages in my log file re UUEE and the Moscow Scenery (I know there are entries for LUKK, EPRZ and EPRJ, but thought to keep them in here anyway).
Thanks for any help.
=====
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBY and UBBY!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBY and UBBY!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UB11 and UB11!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBQ and UBBQ!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBQ and UBBQ!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UG28 and UG28!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBN and UBBN!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UB10 and UB10!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UB10 and UB10!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UB10 and UB10!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBB and UBBB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBB and UBBB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBB and UBBB!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UBBG and UBBG!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LUKK and LUKK!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at LUKK and LUKK!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUEE and UUEE!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUDD and UUDD!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at UUDD and UUDD!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ULLI and ULLI!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at ULLI and ULLI!
0:00:00.000 W/ATC: Found overlapping airports with overlapping controller freqs at EPRZ and EPRJ!
0:00:00.000 W/ATC: Rewrote UBBY atc_ControllerRole_Twr’s freq: 11850 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBY atc_ControllerRole_Twr’s freq: 12520 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UB11 atc_ControllerRole_Twr’s freq: 12620 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBQ atc_ControllerRole_Twr’s freq: 13390 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBQ atc_ControllerRole_Twr’s freq: 13090 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UG28 atc_ControllerRole_Twr’s freq: 11910 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBN atc_ControllerRole_Twr’s freq: 11820 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UB10 atc_ControllerRole_Twr’s freq: 12640 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UB10 atc_ControllerRole_Twr’s freq: 12400 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UB10 atc_ControllerRole_Twr’s freq: 11900 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBB atc_ControllerRole_Del’s freq: 13569 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBB atc_ControllerRole_Twr’s freq: 11920 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBB atc_ControllerRole_Gnd’s freq: 12170 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote UBBG atc_ControllerRole_Twr’s freq: 12390 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LUKK atc_ControllerRole_Twr’s freq: 11810 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote LUKK atc_ControllerRole_Gnd’s freq: 12180 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 11900 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 12180 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 12900 to 11805 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr’s freq: 12070 to 11807 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 12900 to 11810 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr’s freq: 12900 to 11812 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Twr’s freq: 13150 to 11815 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 12395 to 11817 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUEE atc_ControllerRole_Gnd’s freq: 12395 to 11820 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUDD atc_ControllerRole_Gnd’s freq: 12440 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote UUDD atc_ControllerRole_Gnd’s freq: 12900 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote ULLI atc_ControllerRole_Gnd’s freq: 12800 to 11800 for being in conflict!
0:00:00.000 W/ATC: Rewrote ULLI atc_ControllerRole_Gnd’s freq: 12900 to 11802 for being in conflict!
0:00:00.000 W/ATC: Rewrote EPRZ atc_ControllerRole_Twr’s freq: 12680 to 11800 for being in conflict!
=====
-
Moter
- 50-99 posts
- Posts: 67
- Joined: Tuesday 25 Nov 2014, 09:41
- Location: Gomel, Belarus
Re: UUEE 1.6 together with Moscow City 1.1
Post
by Moter » Sunday 02 Apr 2017, 10:23
cmaesing wrote:Am using X-Plane 10.51 (W7 64), and only yesterday installed these two sceneries (UUEE previously purchased, updated from 1.3), using the automatic installer files from simMarket.com (where the sceneries were also purchased).
Starting X-Plane is impossible now (possibly due to the Warsaw City scenery — I’ll post about that error in the other forum), but I do also get error messages in my log file re UUEE and the Moscow Scenery (I know there are entries for LUKK, EPRZ and EPRJ, but thought to keep them in here anyway).
Thanks for any help.
You tried to delete our scenery’s and open x-plane without them? I tried to open EPWA and UUEE x-plane work perfectly. Yes i am have warnings in log.txt too, but this does not interfere with the normal operation of the X-plane. In next update i try fix all warnings.
-
Vincenzo
- 5-12 posts
- Posts: 9
- Joined: Friday 31 Mar 2017, 18:25
- Name: Tomas
- Location: Plzen
Post
by Vincenzo » Thursday 06 Apr 2017, 10:33
Vincenzo wrote:
DD Stanislaw wrote:Hello.
Is it Windows that you are using? Did you use the automatic installer?Hello Stanislaw,
yes, I use Windows 10. And I used automatic installer.
Hello,
do somebody have the same problem with DME indication like me? Or does it work by others?
I use X-Plane 10.51 / Windows 10 / DD sceneries bought on Simmarket, also re-downloaded last version of installers (just for sure) and run installation as admin.
Thank you