Battleye launcher ошибка при запуске destiny 2

Если после установки Destiny 2 со Steam никак не получается установить лаунчер BattlEye, то сейчас как раз о том, как эту проблему устранить и играть онлайн нормально.

Читы, аимботы, ESP и прочие валлхаки — дело, конечно, в немалой степени увлекательное. Но явно не для всех. Растущая популярность  Battleye и аналогичных систем — самое наглядное тому доказательство.

Другое дело, что с BattlEye тоже случается всякое. И сейчас — об одном из таких случаев.

В слову, на момент публикации этого поста саппорт Bungie уже отрапортовал в официальном твиттере, что в числе прочих они уже решают и проблему с BattlEye. Так что, проверяем и если анти-чит в Destiny 2 по-прежнему устанавливаться не желает, значит, разрабы баг еще не пофиксили.

Следовательно, придется либо еще немного подождать, либо вот,..

как установить лаунчер Battleye в Destiny 2, если прога постоянно выдает ошибку

По мнению специалистов службы поддержки Bungie данная проблема, а именно ошибка при установке Battleye, возникает по причине того, что прога или уже установлена, но некорректно, или этап её установки был пропущен и вызвал сбой в работе системы.

Так или иначе, но если Battleye в Destiny 2 не устанавливается, то делаем следующее:

• открываем клиент Steam и переходим в Библиотеку;
• в списке игр находим Destiny 2, кликаем по названию правой кнопкой мыши и в открывшемся меню жмем «Свойства«;
• в следующем окне переходим во вкладку «Локальные файлы» и жмем кнопку «Посмотреть локальные файлы«;
• далее находим и открываем папку Battleye;
• в ней находим файл install_BattlEye.bat и двойным кликом запускаем по нему установку (на запрос разрешить изменения жмем «Да»);
• после завершения процедуры установки запускаем Destiny 2 и подтверждаем включение Battlеye.

Вот как-то так…

Не пропустите: ПРОБЛЕМЫ DESTINY 2 В STEAM: НЕ ПОЛУЧАЕТСЯ ЗАЙТИ, ВИСНЕТ, ОШИБКИ, ВЫЛЕТАЕТ И ПР

Destiny 2 players might encounter the dreaded «Failed to initialize BattlEye Service: Driver Load Error (1275)» message while launching the game. A conflict between the game’s anti-cheat software, BattlEye, and a Windows security feature called «Hardware-enforced Stack Protection» causes this error. Fortunately, there are ways to resolve this issue and get back to enjoying the game.

Destiny 2 Troubleshooting: Overcoming BattlEye Service Driver Load Errors

In this article, we’ll guide you through a step-by-step process to fix the BattlEye Service Driver Load Error in Destiny 2. Let’s dive in!

1) Disable Hardware-enforced Stack Protection for Specific Applications

Firstly, you’ll need to disable Hardware-enforced Stack Protection for the following applications:

• BEService.exe (C:Program Files (x86)Common FilesBattlEye)
• destiny2.exe and destiny2launcher.exe (in Destiny 2 installation folder)

To do this, follow these steps:

1. Open Windows Security. You can search from the taskbar or double-click the shield icon in the system tray.
2. Select App & browser control.
3. In the Exploit protection section, click Exploit protection settings.
4. Select the Program settings tab.
5. Select the application.
6. If you cannot find the application in the list, click Add program to customize or Choose exact file paths for BEService.exe, destiny2.exe, and destiny2launcher.exe.
7. After selecting the application from the list, click the Edit button.
8. Scroll down and in the Hardware-enforced Stack Protection section, select Override system settings.
9. Apply the changes.

2) Turn Off Kernel-mode Hardware-enforced Stack Protection

In some cases, you may still experience the error after following the steps above. If that’s the case, you’ll need to revert enabling the security feature using one of the following methods.

Please note that this action will not lower your device’s security or expose it to greater risks compared to before, as this new security feature wasn’t previously enabled on devices.

Warning: Do this at your own risk. It is not recommended to disable Windows security settings just because some spyware tells you to!

Option A: Disable the Feature from the Windows Popup

1. Click the Disable button in the Windows popup that appears, which states that BEDaisy.sys cannot be loaded on this device due to a security feature known as «Hardware-enforced Stack Protection.»
2. Reboot your PC.

Option B: Disable Kernel-mode Hardware-enforced Stack Protection

1. Open the Start menu and type Core isolation in the search bar to access the associated Windows Defender settings.
2. In the Windows Security window, toggle the option labeled Kernel-mode Hardware-enforced Stack Protection to the Off position.
3. Restart your system.

3) Update Your Windows

Lastly, it’s essential to ensure your Windows system is up-to-date. On the other hand, if you face the «Failed to initialize BattlEye Service: Driver Load Error (577)» error on Windows 7, verify that your system is fully updated, or install the following specific update:: SHA-2 Code Signing Support Update.

Frequently Asked Questions

In this section, we’ll address some frequently asked questions related to the BattlEye Service Driver Load Error in Destiny 2.

In Conclusion

By following these steps, you should be able to resolve the BattlEye Service Driver Load Error in Destiny 2 and get back to enjoying your gaming experience. Most importantly, remember to keep your Windows system updated. Also, ensure your antivirus software active to maintain the security of your device.

It’s worth mentioning that developers of anti-cheat software like BattlEye are constantly working on improving compatibility with new security features. Therefore, it’s essential to stay up-to-date with the latest updates and patches for both Destiny 2 and your system’s security features.

In the future, as BattlEye and Microsoft collaborate to resolve these compatibility issues, we can hope for a seamless gaming experience without having to tweak security settings. Until then, follow the steps provided in this guide to fix the BattlEye Service Driver Load Error in Destiny 2.

If you still encounter issues or have any questions, feel free to leave a comment below. Alternatively, you can contact the game’s official support channels. Moreover, keep an eye out for official announcements from Bungie and Microsoft, as they may provide new solutions or updates that address the problem.

Happy gaming, and may the light guide you, Guardians!

Recently many players of Destiny 2 are facing the issue of “Batlleye unable to update”. According to the user, this issue arises right after the game server downtime.

As we investigate that this issue has also been faced by many other Destiny 2 players in the past too.

Don’t worry about it

The CPU Guide brings you the best working solution to solve Battle Eye Unable to update on the PC.

Solution 1: Run Battleye Manually

If the game or launcher is unable to update BattlEye, try running the installer directly from the game files. This may resolve the issue. Make sure to run the installer with administrative privileges for the best results.

1. Open the Window File Explorer
2. Now navigate to the Battleeye folder
3. Here you going to find install_Battleye click right on this application
4. A small menu will pop up then select the Run as Administrator option
5. Now try to update the Battleye

If this solution works for you then follow the next solution to completely remove the error form Destiny 2.

Solution 2: Run the Program as an Administrator (Permanently)

1. Go to the folder/Application
2. Right-click on it
3. A menu will open
4. Select Properties
5. A new window will open
6. Navigate to the “Compatibility Tab“
7. Under the Settings heading
8. Find “Run this Program as an administrator“
   
9. Check the box for this option
10. Click “Apply“

Now your program successfully Runs as an Administrator on Windows (Permanently) and you can easily open the program without repeating the steps again and again.

If you still facing errors then proceed to the next solution

Solution 3: Verify the Game Files

Sometimes the game file will get corrupted or get deleted, which eventually causes a Battleye unable to update issue.

Verify the Game File in Steam

Follow the steps to verify the game file on steam software:

1. Launch the Steam Software
2. Now login in the steam
3. Navigate to the library
4. Select the game and right-click on the game
5. Now select properties
6. Now click on the “Local file” Option
7. A further menu will open
8. Click on the “Verify Integrity of the Game Cache“
9. Now the software is verifying the files, and this will take some time.

Sometimes the game file will get corrupted or get deleted that eventually causing a Crashing issue on steam.

Solution 5: Update Graphics Card Driver with Windows Update

Updating the graphic drivers will help you have a better and more stable graphical experience.

This will fix the “Battleye keeps Crashing on PC” and you will play without getting errors.

Here is how you can update drivers via optional updates:

1. Click on the Windows icon
   
2. Click on the Settings icon
3. A new window will pop up
4. Select Windows Update from the left menu
   
5. The new window will pop up
6. Now select Advanced options
7. Click on Optional updates
   
8. A new window will open
9. Click on the drop-down button for Driver updates
10. Now, select your desired drivers
11. Now press the Download & Install button

If you cannot update your drivers through Windows Update, then you can try updating the Graphics Drivers through Device Manager to fix the Battleye unable to update on your PC.

Solution 6: Update Graphics Card Driver via the Device manager

We can update outdated graphic drivers in multiple ways.

If you cannot update your graphic drivers by updating Windows, you can try updating through the Device Manager.

Here is how you can update drivers through Device Manager:

1. Click on the Search icon
2. Type Device Manager
   
3. Click to open Device Manager
4. Then select the Display adapters
5. A further menu will open
6. Right-click on the graphic card name
7. Click on the Update driver
   

Rolling Back the Driver :

If you experiencing a Battleye unable to update after updating your graphic drivers, then you can roll back the driver’s recent update to avoid the error on Destiny 2.

Here is how you can roll back drivers:

1. Click on the Search icon
2. Type Device Manager
   
3. Click to open Device Manager
4. Then select the Display adapters
5. A further menu will open
6. Right-click on the graphic card name
7. Click on the Properties
   
8. A graphic card properties Windows will open
9. Navigate to the Driver Tab
10. There is an option for “Roll Back Drivers”. Click on it
11. If the option of “Roll Back Drivers” is greyed out, this means that the driver did not update recently.

Solution 7: Check for Driver’s Updates of GPU/Video Card of different company

One of the highlighted issues is outdated GPU drivers leading to crashing.

When our video card has outdated drivers, it’s unable for GPU to align with the modern gaming experience and starts causing Battleye unable to update the issue on Destiny 2.

So, we recommend updating the video card drivers.

Here are the direct links to the main GPU Making Companies:

• AMD
• Nvidia
• Intel

If the above solution didn’t work out for you, then try the next solution.

Solution 8: Disable Antivirus Software

In some cases, the third-party antivirus software installed on a computer may prevent the game Destiny 2 from running properly.

So, you need to disable the antivirus for a few minutes to check if the antivirus is causing it.

In order, to disable the antivirus follow the step below :

1. Select the arrow button on the taskbar a Small menu will open.
2. Then click left on the Avast antivirus icon.
3. The setting menu will open and select ” Avast shield control “
4. In a further menu, you will select the “ 10 minutes option“
5. Now restart the game.

If the issue persists then proceed to the next solution.

Solution 9: Switch To Better Antivirus

If the above solution shows that your antivirus is causing the Battleye unable to update error then it’s time to change the antivirus.

The CPU Guide brings you the best-discounted deals on Top Tier Antivirus.

I am listing down some Best Anti-Virus with Exclusive discounted offers for The CPU Guide readers.

1. Vipre (Save up to $100)
   
2. Esset (25% off)
   
3. AVG Ultimate
   
4. Kaspersky (up to 30%off)
   

Hope all the solutions help you solve the Battleye’s unable to update on Destiny 2.

If you have any queries or suggestions, feel free to share your experience with us in the comments section down below or you can reach us on our social handles.