Amd northbridge rev g2 ошибка

vittau

Distinguished

Sometimes my computer will randomly freeze, the screen goes black or messed up with colored stripes, and then reboots by itself. Event log says this:

[fixed]A fatal hardware error has occurred.
Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error[/fixed]

It usually happens soon after the computer was turned on (sometimes even inside the BIOS Setup). After this period passes, it can stay up for hours and hours without problems (though it has crashed after several hours too). I am not overclocking, though I have tried to OC my graphics card (from 700/1150 to 800/1300) just to test it’s stability, and had no problems with this.

Here are some of the facts I considered important to the case:

■When the crash happens inside the BIOS Setup, the VGA fan goes 100% for a few moments.
■One time I was listening to music, and the music kept on playing for a few seconds after the screen went black, and then it rebooted.
■Ran memtest for

2h without problems.
■Ran Prime95 and FurMark for a few minutes. I didn’t let the tests go for hours because it seems unnecessary (most of the crashes happened while idling anyway).
■My PSU is an OCZ500SXS, should be more than enough.
■Tried increasing the NB and HT voltages a bit, didn’t help.
■BIOS, drivers and OS are updated.

So, does anyone have any ideas?

ASUS M4A785TD-M Evo, AthlonII X4 620, Sapphire HD5750 1GB, 2x 2GB Kingston 1333MHz DDR3, Windows 7 x64 PRO SP1

Источник

Hi,Friends,

I have a problem and send all information about error and my PC to solve this problem

After bluescreen in boot page this message is under the page:

A Hyper Transport Sync Flood Error occurred on last boot

press F1 to resume.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1065

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8595A4A4
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:WindowsMinidump42411-17050-01.dmp
C:UsersSADAF COMPUTERAppDataLocalTempWER-23852-0.sysdata.xml

My PC Info
MS Windows 7 Ultimate 32-bit
——————-
CPU
AMD Phenom II X4 955
Deneb 45nm Technology

AMD Phenom II X4 955
Cores 4
Threads 4
Name AMD Phenom II X4 955
Code Name Deneb
Package Socket AM2+ (940)
Technology 45nm
Specification AMD Phenom(tm) II X4 955 Processor
Family F
Extended family 10
Model 4
Extended model 4
Stepping 3
Revision RB-C3
Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
Bus speed 200.0 MHz
Rated Bus speed 2000.1 MHz
Stock bus speed 200 MHz
——————-
RAM
4.0GB Dual-Channel DDR3 @ 666MHz 9-9-9-24

Memory
Type DDR3
Size 4096 MBytes
Channels # Dual
DRAM frequency 666.7 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# delay (tRCD) 9 clocks
RAS# precharge (tRP) 9 clocks
Cycle time (tRAS) 24 clocks
Bank cycle time (tRС) 33 clocks
Command rate (CR) 1T
———————
MSI 870-G45 (MS-7599) (CPU1)
Motherboard
Manufacturer MSI
Model 870-G45 (MS-7599)
Version 2.0
Chipset vendor ATI
Chipset model RD770
Chipset revision 00
Southbridge vendor ATI
Southbridge model SB750
Southbridge revision 00
BIOS
Brand American Megatrends Inc.
Version V10.5
Date 09/08/2010
———-
Name LG FLATRON E2250(Digital) on ATI Radeon HD 5600 Series
Current Resolution 1920×1080 pixels
Work Resolution 1920×1040 pixels
State enabled, primary, output devices support
Monitor Width 1920
Monitor Height 1080
Monitor Bpp 32 bits per pixel
Monitor Frequency 60 MHz
Device .DISPLAY1Monitor0
ATI Radeon HD 5600 Series
Memory 1024 MB
Memory type 2
Driver version 8.741.0.0
——————

Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1065

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 86D0F3DC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:WindowsMinidump50211-18174-01.dmp
C:UsersSADAF COMPUTERAppDataLocalTempWER-169978-0.sysdata.xml

================================================================================
(From Event Viewer)
Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 2011/05/02 06:02:59 PM
Event ID: 20
Task Category: None
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: lucian121
Description:
A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error
Processor ID: 0

The details view of this entry contains further information.
Event Xml:

20
0
2
0
0
0x8000000000000000

20395

System
lucian121

3
0
4
0xf200000000070f0f
0x0
0x0
7
928
435045521002FFFFFFFF03000100000002000000A00300001F200D0002050B1400000000000000000

Источник

«HyperTransport Watchdog Timeout Error» (0x00000124 code BSOD)

zyxel

Posts: 12 +0

First of all, sorry for my low capacity to express myself in english. I hope that you can understand my message despite that.

Well, I will explain my problem from the beginning (the important thing is at the end, I will also explain another problem I have with the pc, because I want to know if it is related with the BSOD):

Some months ago, I had a very extrange problem with the PC. It happened one time and in the next day the computer ran well. About two months after that, it happened again and, after turning off the case fans, it ran well again
After that, I changed all my computer components except the MoBo, RAM, HD and DVD Reader. But some days ago it happened again, and it was solved by changing the SATA connector of the HD

The problem I am talking you about consists of that the windows animations/clock/all applications runs extremely fast (the clock ticks one minute every second, the animations run extremely fast, etc (all in the windows was «overclocked»))

Well, now I will explain the BSOD problem: yesterday, when I was watching a video in megavideo, the screen went black and the sound looped, and some seconds ago the computer restarted. After rebooting, in the event registry I saw that error reports (I will traduce because I have windows in spanish):

first error report:

Blue Screen code:
0x00000124 (0x0000000000000000, 0xfffffa80050308f8, 0x0000000000000000, 0x0000000000000000).

second error report:

A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error
Processor ID: 0

The details view of this entry contains further information.

I have been a lot of time searching that error in google and I found that it is a hardware error

I have to say that my motherboard has 2 broken MLCC capacitors near the socket, it might be related with that

Please help me, I am very worried and also very confused, I need to know how to find out which is the broken component of my pc(testing applications are reliable?), and what have caused that.

Thanks in advance

motherboard: Asus M3A78-EM (old) (AMD 780G chipset)

processor: Phenom II 1090T (new)

graphics card: Radeon HD 5870 (new)

RAM: Kingston 2x1gb DDR2 800 (old)

HD: Seagate 500GB (old)

PSU: Nox 1000W (new)

if it is needed some more information about my pc to help me please let me know.

Mindumps (I uploaded to megaupload because the forum doesnt let me upload it here :S )

zyxel

Posts: 12 +0

nobody can help me??

I have an interesting update: I have noticed that it crashes (and I get the same error messages) everytime I see a HQ video in megavideo(but not playing). what do you think about that?

PD: I have assumed that the problem of my computer is a hardware issue and I can solve it by formatting or something like that, but I would like to be sure about which is the broken component

Route44

Posts: 12,015 +82

Your error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as «A fatal hardware error has occurred.»

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don’t like working with it. What makes it so difficult is that it can be any hardware in your system — and I mean any.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsink, video card, psu, motherboard, and external harddrive connected by USB.

*** By the fact that you have two broken capacitors I would say either have someone fix them or better yet get a new motherboard. Of course you’ll need to get DDR3 memory but good DDR3 is cheap. *

By the way your English is quite fine.

zyxel

Posts: 12 +0

Your error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as «A fatal hardware error has occurred.»

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don’t like working with it. What makes it so difficult is that it can be any hardware in your system — and I mean any.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsink, video card, psu, motherboard, and external harddrive connected by USB.

*** By the fact that you have two broken capacitors I would say either have someone fix them or better yet get a new motherboard. Of course you’ll need to get DDR3 memory but good DDR3 is cheap. *

By the way your English is quite fine.

Yes, I will get a new motherboard as soon as possible (next monday xD) as well as new RAM and possibly a new HD (in order to take advantage of SATA3).

I know (by other posts) that that error code doesnt give any information about which component is failing but, what do you think about that:

A fatal hardware error has occurred.

Друзья, нужен совет.

Вылетает система. Иногда появляется BSOD с ошибкой 0x00000124, но чаще всего на несколько секунд белеет экран, или артефакты, и какой-то кулер в корпусе начинает реветь, как бешеный (не отслеживал, что именно за кулер, но похоже на видеокарту по звуку).

Сначала проявлялось при игре в Warcraft III, если одновременно играть и слушать музыку. Но сейчас и без этого вылетает, в режиме рабочего стола.

Конфигурация: Windows 7 x64, мат. плата ASUS M4A79XTD EVO, 12 gb памяти, процессор AMD Phenom II x4 945 Deneb (не разогнан), Sapphire Radeon HD 4830 hdmi, бп Enchance 550w, SSD Kingmax 120 gb.

Два винта под файлы, один пробовал отключать — не помогает.

На процессоре нормальное охлаждение (башня), да и вентиляторов в корпусе хватает, если верить датчикам, перегрева нигде и близко нет.

Память проверялась мемтестом пару месяцев назад.

Пробовал обновлять драйвер на видео, поставил самый новый. Толку нет.

Да, ещё я понижал напряжение ядра ЦП через BIOS, потом, естественно, прогонял тестами, играл в GTA 4, и никаких проблем. Сейчас повысил немного, но всё равно вылетает.

Похожие симптомы были, когда у меня видеокарта перегревалась, но сейчас же перегрев не регистрируется.

Update:

Тут в соседней теме советуют человеку посмотреть в журнале событий, я у себя в журнале нашёл такое:

Неустранимая аппаратная ошибка.

Я догадываюсь, что ответы будут примерно следующие: недостаточно мощности бп, неисправна материнка, неисправен бп,  не хватает питания процессору, но, может кто-то уже сталкивался с подобным и может подсказать что-то конкретное? например, может ли проблема крыться в драйверах на видеокарту? Я слышал, что в новых версиях амдишных драйверов поддержка старых карточек не очень?

vittau

Distinguished

Sometimes my computer will randomly freeze, the screen goes black or messed up with colored stripes, and then reboots by itself. Event log says this:

[fixed]A fatal hardware error has occurred.
Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error[/fixed]

It usually happens soon after the computer was turned on (sometimes even inside the BIOS Setup). After this period passes, it can stay up for hours and hours without problems (though it has crashed after several hours too). I am not overclocking, though I have tried to OC my graphics card (from 700/1150 to 800/1300) just to test it’s stability, and had no problems with this.

Here are some of the facts I considered important to the case:

■When the crash happens inside the BIOS Setup, the VGA fan goes 100% for a few moments.
■One time I was listening to music, and the music kept on playing for a few seconds after the screen went black, and then it rebooted.
■Ran memtest for

2h without problems.
■Ran Prime95 and FurMark for a few minutes. I didn’t let the tests go for hours because it seems unnecessary (most of the crashes happened while idling anyway).
■My PSU is an OCZ500SXS, should be more than enough.
■Tried increasing the NB and HT voltages a bit, didn’t help.
■BIOS, drivers and OS are updated.

So, does anyone have any ideas?

ASUS M4A785TD-M Evo, AthlonII X4 620, Sapphire HD5750 1GB, 2x 2GB Kingston 1333MHz DDR3, Windows 7 x64 PRO SP1

Источник

Amd northbridge hypertransport watchdog timeout error

Hi,Friends,

I have a problem and send all information about error and my PC to solve this problem

After bluescreen in boot page this message is under the page:

A Hyper Transport Sync Flood Error occurred on last boot

press F1 to resume.

Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1065

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8595A4A4
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:WindowsMinidump42411-17050-01.dmp
C:UsersSADAF COMPUTERAppDataLocalTempWER-23852-0.sysdata.xml

My PC Info
MS Windows 7 Ultimate 32-bit
——————-
CPU
AMD Phenom II X4 955
Deneb 45nm Technology

AMD Phenom II X4 955
Cores 4
Threads 4
Name AMD Phenom II X4 955
Code Name Deneb
Package Socket AM2+ (940)
Technology 45nm
Specification AMD Phenom(tm) II X4 955 Processor
Family F
Extended family 10
Model 4
Extended model 4
Stepping 3
Revision RB-C3
Instructions MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
Bus speed 200.0 MHz
Rated Bus speed 2000.1 MHz
Stock bus speed 200 MHz
——————-
RAM
4.0GB Dual-Channel DDR3 @ 666MHz 9-9-9-24

Memory
Type DDR3
Size 4096 MBytes
Channels # Dual
DRAM frequency 666.7 MHz
CAS# Latency (CL) 9 clocks
RAS# to CAS# delay (tRCD) 9 clocks
RAS# precharge (tRP) 9 clocks
Cycle time (tRAS) 24 clocks
Bank cycle time (tRС) 33 clocks
Command rate (CR) 1T
———————
MSI 870-G45 (MS-7599) (CPU1)
Motherboard
Manufacturer MSI
Model 870-G45 (MS-7599)
Version 2.0
Chipset vendor ATI
Chipset model RD770
Chipset revision 00
Southbridge vendor ATI
Southbridge model SB750
Southbridge revision 00
BIOS
Brand American Megatrends Inc.
Version V10.5
Date 09/08/2010
———-
Name LG FLATRON E2250(Digital) on ATI Radeon HD 5600 Series
Current Resolution 1920×1080 pixels
Work Resolution 1920×1040 pixels
State enabled, primary, output devices support
Monitor Width 1920
Monitor Height 1080
Monitor Bpp 32 bits per pixel
Monitor Frequency 60 MHz
Device .DISPLAY1Monitor0
ATI Radeon HD 5600 Series
Memory 1024 MB
Memory type 2
Driver version 8.741.0.0
——————

Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1065

Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 86D0F3DC
BCP3: 00000000
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1

Files that help describe the problem:
C:WindowsMinidump50211-18174-01.dmp
C:UsersSADAF COMPUTERAppDataLocalTempWER-169978-0.sysdata.xml

================================================================================
(From Event Viewer)
Log Name: System
Source: Microsoft-Windows-WHEA-Logger
Date: 2011/05/02 06:02:59 PM
Event ID: 20
Task Category: None
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: lucian121
Description:
A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error
Processor ID: 0

The details view of this entry contains further information.
Event Xml:

20
0
2
0
0
0x8000000000000000

20395

System
lucian121

3
0
4
0xf200000000070f0f
0x0
0x0
7
928
435045521002FFFFFFFF03000100000002000000A00300001F200D0002050B1400000000000000000

Источник

«HyperTransport Watchdog Timeout Error» (0x00000124 code BSOD)

zyxel

Posts: 12 +0

First of all, sorry for my low capacity to express myself in english. I hope that you can understand my message despite that.

Well, I will explain my problem from the beginning (the important thing is at the end, I will also explain another problem I have with the pc, because I want to know if it is related with the BSOD):

Some months ago, I had a very extrange problem with the PC. It happened one time and in the next day the computer ran well. About two months after that, it happened again and, after turning off the case fans, it ran well again
After that, I changed all my computer components except the MoBo, RAM, HD and DVD Reader. But some days ago it happened again, and it was solved by changing the SATA connector of the HD

The problem I am talking you about consists of that the windows animations/clock/all applications runs extremely fast (the clock ticks one minute every second, the animations run extremely fast, etc (all in the windows was «overclocked»))

Well, now I will explain the BSOD problem: yesterday, when I was watching a video in megavideo, the screen went black and the sound looped, and some seconds ago the computer restarted. After rebooting, in the event registry I saw that error reports (I will traduce because I have windows in spanish):

first error report:

Blue Screen code:
0x00000124 (0x0000000000000000, 0xfffffa80050308f8, 0x0000000000000000, 0x0000000000000000).

second error report:

A fatal hardware error has occurred.

Component: AMD Northbridge
Error Source: Machine Check Exception
Error Type: HyperTransport Watchdog Timeout Error
Processor ID: 0

The details view of this entry contains further information.

I have been a lot of time searching that error in google and I found that it is a hardware error

I have to say that my motherboard has 2 broken MLCC capacitors near the socket, it might be related with that

Please help me, I am very worried and also very confused, I need to know how to find out which is the broken component of my pc(testing applications are reliable?), and what have caused that.

Thanks in advance

motherboard: Asus M3A78-EM (old) (AMD 780G chipset)

processor: Phenom II 1090T (new)

graphics card: Radeon HD 5870 (new)

RAM: Kingston 2x1gb DDR2 800 (old)

HD: Seagate 500GB (old)

PSU: Nox 1000W (new)

if it is needed some more information about my pc to help me please let me know.

Mindumps (I uploaded to megaupload because the forum doesnt let me upload it here :S )

zyxel

Posts: 12 +0

nobody can help me??

I have an interesting update: I have noticed that it crashes (and I get the same error messages) everytime I see a HQ video in megavideo(but not playing). what do you think about that?

PD: I have assumed that the problem of my computer is a hardware issue and I can solve it by formatting or something like that, but I would like to be sure about which is the broken component

Route44

Posts: 12,015 +82

Your error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as «A fatal hardware error has occurred.»

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don’t like working with it. What makes it so difficult is that it can be any hardware in your system — and I mean any.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsink, video card, psu, motherboard, and external harddrive connected by USB.

*** By the fact that you have two broken capacitors I would say either have someone fix them or better yet get a new motherboard. Of course you’ll need to get DDR3 memory but good DDR3 is cheap. *

By the way your English is quite fine.

zyxel

Posts: 12 +0

Your error is 0x124: WHEA_UNCORRECTABLE_ERROR and is described as «A fatal hardware error has occurred.»

This error code and definition has replaced the older XP code 0x9C: MACHINE_CHECK_EXCEPTION and though it is older the definition still is applicable: This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU).

Honestly, this is a very difficult error to work with because as it says a clear diagnosis rarely comes forth and I have never seen a minidump with either error codes give a definitive answer. I know IT techs that don’t like working with it. What makes it so difficult is that it can be any hardware in your system — and I mean any.

Here are some of the causes that were determined to be the source o 0x124/0x9C errors from posters here and abroad: NIC, DVD/CD drives, dust build up around the CPU that caused overheating of said CPU, bulging capacitors hidden by heatsink, video card, psu, motherboard, and external harddrive connected by USB.

*** By the fact that you have two broken capacitors I would say either have someone fix them or better yet get a new motherboard. Of course you’ll need to get DDR3 memory but good DDR3 is cheap. *

By the way your English is quite fine.

Yes, I will get a new motherboard as soon as possible (next monday xD) as well as new RAM and possibly a new HD (in order to take advantage of SATA3).

I know (by other posts) that that error code doesnt give any information about which component is failing but, what do you think about that:

A fatal hardware error has occurred.

Друзья, нужен совет.

Вылетает система. Иногда появляется BSOD с ошибкой 0x00000124, но чаще всего на несколько секунд белеет экран, или артефакты, и какой-то кулер в корпусе начинает реветь, как бешеный (не отслеживал, что именно за кулер, но похоже на видеокарту по звуку).

Сначала проявлялось при игре в Warcraft III, если одновременно играть и слушать музыку. Но сейчас и без этого вылетает, в режиме рабочего стола.

Конфигурация: Windows 7 x64, мат. плата ASUS M4A79XTD EVO, 12 gb памяти, процессор AMD Phenom II x4 945 Deneb (не разогнан), Sapphire Radeon HD 4830 hdmi, бп Enchance 550w, SSD Kingmax 120 gb.

Два винта под файлы, один пробовал отключать — не помогает.

На процессоре нормальное охлаждение (башня), да и вентиляторов в корпусе хватает, если верить датчикам, перегрева нигде и близко нет.

Память проверялась мемтестом пару месяцев назад.

Пробовал обновлять драйвер на видео, поставил самый новый. Толку нет.

Да, ещё я понижал напряжение ядра ЦП через BIOS, потом, естественно, прогонял тестами, играл в GTA 4, и никаких проблем. Сейчас повысил немного, но всё равно вылетает.

Похожие симптомы были, когда у меня видеокарта перегревалась, но сейчас же перегрев не регистрируется.

Update:

Тут в соседней теме советуют человеку посмотреть в журнале событий, я у себя в журнале нашёл такое:

Неустранимая аппаратная ошибка.

Я догадываюсь, что ответы будут примерно следующие: недостаточно мощности бп, неисправна материнка, неисправен бп,  не хватает питания процессору, но, может кто-то уже сталкивался с подобным и может подсказать что-то конкретное? например, может ли проблема крыться в драйверах на видеокарту? Я слышал, что в новых версиях амдишных драйверов поддержка старых карточек не очень?

I have a problem and send all information about error and my PC to solve this problem

press F1 to resume…

Друзья, нужен совет.

Вылетает система. Иногда появляется BSOD с ошибкой 0x00000124, но чаще всего на несколько секунд белеет экран, или артефакты, и какой-то кулер в корпусе начинает реветь, как бешеный (не отслеживал, что именно за кулер, но похоже на видеокарту по звуку).

Сначала проявлялось при игре в Warcraft III, если одновременно играть и слушать музыку. Но сейчас и без этого вылетает, в режиме рабочего стола.

Конфигурация: Windows 7 x64, мат. плата ASUS M4A79XTD EVO, 12 gb памяти, процессор AMD Phenom II x4 945 Deneb (не разогнан), Sapphire Radeon HD 4830 hdmi, бп Enchance 550w, SSD Kingmax 120 gb.

Два винта под файлы, один пробовал отключать — не помогает.

На процессоре нормальное охлаждение (башня), да и вентиляторов в корпусе хватает, если верить датчикам, перегрева нигде и близко нет.

Память проверялась мемтестом пару месяцев назад.

Пробовал обновлять драйвер на видео, поставил самый новый. Толку нет.

Да, ещё я понижал напряжение ядра ЦП через BIOS, потом, естественно, прогонял тестами, играл в GTA 4, и никаких проблем. Сейчас повысил немного, но всё равно вылетает.

Похожие симптомы были, когда у меня видеокарта перегревалась, но сейчас же перегрев не регистрируется.

Update:

Тут в соседней теме советуют человеку посмотреть в журнале событий, я у себя в журнале нашёл такое:

Неустранимая аппаратная ошибка.

Я догадываюсь, что ответы будут примерно следующие: недостаточно мощности бп, неисправна материнка, неисправен бп,  не хватает питания процессору, но, может кто-то уже сталкивался с подобным и может подсказать что-то конкретное? например, может ли проблема крыться в драйверах на видеокарту? Я слышал, что в новых версиях амдишных драйверов поддержка старых карточек не очень?