After effects ошибка переполнение преобразование знаменателей пропорции 17 18

Thanks Nishu!

My specs are as follows:

• AMD Ryzen 9 5950X
• Gigabyte GeForce RTX 3080
• Kingston FURY Beast RGB Black 64GB (2x32GB) PC4-28800 (3600MHz) DDR
• Windows 11 Home 21H2

I’m currently running:

• After Effects V22.2
• Premiere Pro V22.2

I’m using a combination of footage from an FX3, A73, and DJI Mavic Pro 2. I get the error when using clips from any of these.

The FX3 footage is 4k 25fps MP4/MOV H.264 10 bit 4:2:2 

The A73 footage is 4k 25fps MP4/MOV H.264 4:2:0 

The Drone footage is 2688 x 1512 50fps MP4/MOV H.264 4:2:0 

Both Premiere Pro and After Effects compositions are set to 25fps.

Let me know if there’s anything else I can provide.

Thank you for your help!!

Jake

Alright, well since I’m unsure as to quite what specs you need, I’ll just list out all of them, and let you pick out what is actually neccesary. So first, onto my actual rig specs:

• My processor is an Intel Core i9-9900k, with a code name of ‘Coffee Lake’, and a max TDP of 95.0W. The package is a Socket 1151 LGA, and has 8 cores and 16 threads.
• My motherboard is a Z390 AORUS PRO WIFI-CF made by Gigabyte Technology. It’s bus specs are listed as a PCI-Express 3.0, with a GT/s speed of 8.0.
• I run DDR4 memory, with an active dual channel, and I have 32gb worth of it- with 10gb of it not currently being used for any sort of program or game.
• My graphics card is a NVIDEA GeForce RTX 3060, with a built in memory of 12gb- which has been perfectly fine to run all three of my monitors, plus my virtual reality headset before without issue.

I didn’t include these specifications before, as I have been editing like this for years now- and my parts in all of that time have not changed, so I had assumed that it was not a hardware issue. Moving on to the capture software I have used, I can tell you with almost complete certainty it was not caused by that. I use OBS, which is practically the industry standard for livestreaming, and recording gameplay footage. Something, again, I have been doing for a while without issue. I have not touched the output settings of the program since I had first set them up, and I rarely update the software, more admittedly out of my own lazyness than anytyhing else.

But, as for the specs at which all of my footage is captured:

• I record my footage as an MP4 file, and encode the footage with your standard x264 encoder.
• The footage itself is in no way rescaled upon encoding- and is recorded in your standard 1920×1080 size.
• The bitrate at which the footage is recorded is kept consistant all throughout, using the ‘CBR’ preset built into the OBS program- with a set bitrate of 40000/Kbps
• The keyframe interval under CBR is set to ‘0’, meaning the interval will automatically adjust itself, and the CPU Usage Preset is set to ‘superfast’, meaning the encoding will take up less of the CPU than were it set to something much slower.

Again, I doubt that it would be an issue with how the footage used was generated, as I had been editing the footage together perfectly fine up until this point; it’s a composition I had been putting together for several days up until now, and the issue only came about after I had tried to actuall render a portion of my timeline out. Speaking of the timeline however, next up I’m going to list out my actual After Effects settings:

• My ‘Video Rendering and Effects’ setting is set to use only Mercury Software, for the main reason that for the longest time now- in an issue separate to this one- setting it to work alongside my GPU would prevent a good few of my plugins from working.
• The expressions engine that After Effects is set to work with, is set to ‘JavaScript’.
• My ‘Path Point and handle Size’ is set to 5 pixels.
• Show Tool Tips is enabled.
• Create Layers at Composition Start Time is enabled.
• Switches Affect Nested Comps is enabled.
• Default Spatial Interpolation to Linear is disabled.
• Preserve Constant Vertex and Feather Point Count when Editing Masks is enabled.
• Pen Tool shortcut Toggles Between Pen and Mask Feather Tools is enabled.
• Center Anchor Point in New Shape Layers is disabled.
• Synchronize Time of All Related Items is enabled.
• Expression Pick Whip Writes Compact English is enabled.
• Create Split Layers Above Original Layer is enabled.
• Allow Scripts to write Files and Access Network is enabled.
• Enable JavaScript Debugger is disabled.
• Use System Color Picker is disabled.
• Dynamic Link with After Effects Uses Project File Name with Highest Number is disabled.
• Play Sound when Render Finishes is enabled.
• Show Warning Banner When Project Contains Expression Errors is disabled.
• My Adaptive Resolution Limit is ‘1/8’.
• Show internal Wireframes is enabled.
• My Zoom Quality is ‘More Accurate’.
• My Color Management Quality is ‘More Accurate Except Cached Preview’.#
• Mute Audio When Preview is Not Real-Time is disabled.
• No Motion Path is disabled.
• All Keyframes is disabled.
• No More Tah x Keyframes is disabled.
• No More Than ‘0:00:15:00’ is ‘0:00:15:00 Base 30’ is enabled.
• Disable Thumbnails in Project Panel is disabled.
• Show Rendering Progress in Info Panel and Flowchart is disabled.
• Hardware Accelerate Composition, Layer, and Footage Panels is enabled.
• Show Both Timecode and Frames and Timeline Panel is enabled.
• Still Footage is set to Length of Composition.
• Sequence Footage is set to 30 frames per second.
• Report Missing Frames is Enabled.
• Verify Individual Files (slower) is disabled.
• Enable Accelerated H.264 Decoding (requires restart) is enabled.
• Auto Reload is set to Non-Sequence Footage.
• Interminate Media NTSC is set to Drop Frame.
• Interpret Unlabled Alpha As is set to Ask User.
• Drag Import Multiple Items As is set to Footage.
• Disk Cache is enabled.
• Maximum Disk Cache Size is set to 500gb.
• My disk cache folder is set to my C drive, inside of AppData, Local, and then Temp.
• My database is set to: ‘C:UsersMYUSERPROFILEAppDataRoamingAdobeCommon’
• My cache is set to: ‘C:UsersMYUSERPROFILEAppDataRoamingAdobeCommon’
• My XMP Metadata is set to Create Layer Markers From Footage XMP Metadata.
• Enable Mercury Transmit is enabled.
• Disable Video Output when In The Background is enabled.
• Video Preview During Render Queue Output is enabled.
• Auto-Save is set to Save Every 20 Minutes.
• Save when Starting Render Queue is enabled.
• Maximum Project Versions is set to 5.
• RAM Reserved for other applications is set to 3GB.

I have skipped over the settings which I can only assume would have been of no help, however knowing my luck I’ve probably skipped over the most important setting. If so, don’t be affraid to let me know, and I’ll make sure to add it to the list (or replay once again with the setting if post editing isn’t a thing on this forum). That aside however, the only extra setting I can thing I might need to cover, is that I use a custom profile in After Effects to allow me to work across multiple monitors.

Last but not least, I want to now list the ‘settings’ if that is the correct term, of the imported files in the editing project. Admittedly, I don’t know how to find these settings for the purely audio files, but as far as the video files go:

• Footage One has a frame rate of 60 fps, and is set to use the frame rate from the original file. Which is, again, 60 fps. It has a start timecode of 0:00:00:00, and is set to use the timecode from the original file- which is, again, 0:00:00:00. Separate Fields is set to Off. Remove Pulldown is set to Off. The Pixel Aspect Ration is set to Square Pixels. The footage is set to Loop 1 Times.
• Footage Two has a frame rate of 60 fps, and is set to use the frame rate from the original file. Which is, again, 60 fps. Though grayed out, this piece of footage has a Drop Frame of 1:56:51:06 with a funky triangle symbol before it. It has a start timecode of 0:00:00:00, and is set to use the timecode from the original file- which is, again, 0:00:00:00. Separate Fields is set to Off. Remove Pulldown is set to Off. The Pixel Aspect Ration is set to Square Pixels. The footage is set to Loop 1 Times.
• Footage Three has a frame rate of 60 fps, and is set to use the frame rate from the original file. Which is, again, 60 fps. Though grayed out, this piece of footage has a Drop Frame of 0:01:55:41 with a funky triangle symbol before it. It has a start timecode of 0:00:00:00, and is set to use the timecode from the original file- which is, again, 0:00:00:00. Separate Fields is set to Off. Remove Pulldown is set to Off. The Pixel Aspect Ration is set to Square Pixels. The footage is set to Loop 1 Times.
• Footage Four has a frame rate of 30 fps, and is set to use the frame rate from the original file. Which is, again, 30 fps. Though grayed out, this piece of footage has a Drop Frame of 0:02:34:29 with a funky triangle symbol before it. It has a start timecode of 0:00:00:00, and is set to use the timecode from the original file- which is, again, 0:00:00:00. Separate Fields is set to Off. Remove Pulldown is set to Off. The Pixel Aspect Ration is set to Square Pixels. The footage is set to Loop 1 Times.
• Footage Five has a frame rate of 30 fps, and is set to use the frame rate from the original file. Which is, again, 30 fps. Though grayed out, this piece of footage has a Drop Frame of 0:00:03:08 with a funky triangle symbol before it. It has a start timecode of 0:00:00:00, and is set to use the timecode from the original file- which is, again, 0:00:00:00. Separate Fields is set to Off. Remove Pulldown is set to Off. The Pixel Aspect Ration is set to Square Pixels. The footage is set to Loop 1 Times.

The rest of the files within my composition bin, are either music tracks- that being audio only, or are nested compositions- or even older projects that I have imported into this one, in order to use files from past editing projects. The actual composition, that my edits are taking place in, has the following settings:

• Width 1920.
• Heigh 1080.
• Pixel Aspect Ratio is set to Square Pixels.
• Frame Rate is set to 60 FPS.
• The Resolution is set to a Quarter.
• The Start Timecode is set to 0:00:00:00.
• The Duration is set to 1:56:51:06.

Strange enough, the thought only came to me whilst writing up this report, that perhaps removing the folder that is, quite literally, just my last editing project, might fix the situation- and upon trying it After Effects once again crashed, meaning it is impossible for me to remove said folder. If you need any more information, please don’t hesitate to let me know; I really don’t want to have to start this project again, as it has taken me quite some time to get to this point.

	Номер ошибки:	Ошибка 17 18
Название ошибки:	Adobe After Effects Error 17 18
Описание ошибки:	Ошибка 17 18: Возникла ошибка в приложении Adobe After Effects. Приложение будет закрыто. Приносим извинения за неудобства.
Разработчик:	Adobe Systems Inc.
Программное обеспечение:	Adobe After Effects
Относится к:	Windows XP, Vista, 7, 8, 10, 11

Описание «Adobe After Effects Error 17 18»

«Adobe After Effects Error 17 18» — это стандартная ошибка времени выполнения. Программисты, такие как Adobe Systems Inc., стремятся создавать программное обеспечение, свободное от этих сбоев, пока оно не будет публично выпущено. Поскольку разработчики программного обеспечения пытаются предотвратить это, некоторые незначительные ошибки, такие как ошибка 17 18, возможно, не были найдены на этом этапе.

После первоначального выпуска пользователи Adobe After Effects могут столкнуться с сообщением «Adobe After Effects Error 17 18» во время запуска программы. В случае обнаруженной ошибки 17 18 клиенты могут сообщить о наличии проблемы Adobe Systems Inc. по электронной почте или сообщать об ошибках. Затем Adobe Systems Inc. исправит ошибки и подготовит файл обновления для загрузки. Чтобы исправить такие ошибки 17 18 ошибки, устанавливаемое обновление программного обеспечения будет выпущено от поставщика программного обеспечения.

В чем причина ошибки 17 18?

В большинстве случаев вы увидите «Adobe After Effects Error 17 18» во время загрузки Adobe After Effects. Мы можем определить происхождение ошибок ошибки 17 18 во время выполнения следующим образом:

Ошибка 17 18 Crash — Ошибка 17 18 остановит компьютер от выполнения обычной программной операции. Как правило, это результат того, что Adobe After Effects не понимает входные данные или не знает, что выводить в ответ.

Утечка памяти «Adobe After Effects Error 17 18» — последствия утечки памяти Adobe After Effects связаны с неисправной операционной системой. Повреждение памяти и другие потенциальные ошибки в коде могут произойти, когда память обрабатывается неправильно.

Ошибка 17 18 Logic Error — логическая ошибка возникает, когда компьютер производит неправильный вывод, даже если вход правильный. Это может произойти, когда исходный код Adobe Systems Inc. имеет уязвимость в отношении передачи данных.

Большинство ошибок Adobe After Effects Error 17 18 являются результатом отсутствия или повреждения версии файла, установленного Adobe After Effects. Большую часть проблем, связанных с данными файлами, можно решить посредством скачивания и установки последней версии файла Adobe Systems Inc.. Помимо прочего, в качестве общей меры по профилактике и очистке мы рекомендуем использовать очиститель реестра для очистки любых недопустимых записей файлов, расширений файлов Adobe Systems Inc. или разделов реестра, что позволит предотвратить появление связанных с ними сообщений об ошибках.

Типичные ошибки Adobe After Effects Error 17 18

Adobe After Effects Error 17 18 Проблемы, связанные с Adobe After Effects:

• «Ошибка приложения Adobe After Effects Error 17 18.»
• «Ошибка программного обеспечения Win32: Adobe After Effects Error 17 18»
• «Adobe After Effects Error 17 18 должен быть закрыт. «
• «Файл Adobe After Effects Error 17 18 не найден.»
• «Adobe After Effects Error 17 18 не найден.»
• «Проблема при запуске приложения: Adobe After Effects Error 17 18. «
• «Файл Adobe After Effects Error 17 18 не запущен.»
• «Adobe After Effects Error 17 18 остановлен. «
• «Неверный путь к программе: Adobe After Effects Error 17 18. «

Ошибки Adobe After Effects Error 17 18 EXE возникают во время установки Adobe After Effects, при запуске приложений, связанных с Adobe After Effects Error 17 18 (Adobe After Effects), во время запуска или завершения работы или во время установки ОС Windows. Отслеживание того, когда и где возникает ошибка Adobe After Effects Error 17 18, является важной информацией при устранении проблемы.

Корень проблем Adobe After Effects Error 17 18

Заражение вредоносными программами, недопустимые записи реестра Adobe After Effects или отсутствующие или поврежденные файлы Adobe After Effects Error 17 18 могут создать эти ошибки Adobe After Effects Error 17 18.

Точнее, ошибки Adobe After Effects Error 17 18, созданные из:

• Недопустимый Adobe After Effects Error 17 18 или поврежденный раздел реестра.
• Загрязненный вирусом и поврежденный Adobe After Effects Error 17 18.
• Другая программа (не связанная с Adobe After Effects) удалила Adobe After Effects Error 17 18 злонамеренно или по ошибке.
• Другое программное обеспечение, конфликтующее с Adobe After Effects, Adobe After Effects Error 17 18 или общими ссылками.
• Adobe After Effects (Adobe After Effects Error 17 18) поврежден во время загрузки или установки.

Продукт Solvusoft

Загрузка
WinThruster 2023 — Проверьте свой компьютер на наличие ошибок.

Совместима с Windows 2000, XP, Vista, 7, 8, 10 и 11

Установить необязательные продукты — WinThruster (Solvusoft) | Лицензия | Политика защиты личных сведений | Условия | Удаление